• 01430 440099
  • 07905 965488
Home > rac preparation east yorkshire

RAC APPROVED - VEHICLE PREPARATION STANDARD in Triad of Newport - East Yorkshire

The vehicle has been prepared to ensure that the following items/parts/functionality are in correct working order.

1.VEHICLE HISTORY

  1. VIN Inspection
  2. Vehicle History Report Obtained
  3. Scheduled Maintenance Performed (inc timing belt)
  4. Current MOT Certificate (if applicable)

2.ROAD TEST

  1. Cruise Control (if applicable)
  2. Satisfactory starting, general performance and behaviour of the vehicle
  3. Particular attention to the operation of clutch, transmission, steering, suspension and brakes including A.B.S.
  4. Ensure there are no abnormal noises
  5. There are no visual fluid leaks after road test
  6. Gauges operate property
  7. Check battery and starter motor start engine with ease from both hot and cold
  8. Check battery and starter motor start engine with ease from both hot and cold
  9. Check hot-starting and ensure no evidence of over-heating
  10. Check no stored faults on the OBD
  11. Ensure correct operation and efficiency of the parking brake

3.VEHICLE EXTERIOR

  1. No dents or scratches visible to the eye from a distance of 2m
  2. Windscreen free from any damage that would exclude the vehicle from an MOT test
  3. Ensure there are no signs of bodywork corrosion
  4. Operation and condition of exterior mirrors/li>
  5. Ensure all structural body repairs/accident damage have been repaired using manufacturer approved methods
  6. Ensure correct body panel fitting and alignment
  7. Operation of fuel filler system including petrol caps and lever release system
  8. Operation of bonnet catch, safety catch, hinges, tailgate supports
  9. Operation of door Locks and central locking including child safety locks
  10. Ensure exterior trim for security and correct fitment

4.VEHICLE INTERIOR

  1. Operation of door windows (manual/electric)
  2. Operation of all exterior Lighting equipment and respective control lights and cluster illumination Operation of wipers and washers
  3. Operation of convertible roof mechanism (if applicable) Visual check of correct SRS functionality
  4. All warning Lights operate correctly
  5. Operation of audio and alarm systems
  6. Operation of Navigation System (if applicable)
  7. Operation of Air-conditioning, heating and demist systems Operation of instruments, gauges and controls
  8. Operation of all internal equipment (eg cigarette lighters, sun visors, arms rests etc)
  9. Operation of visual and audible driver warning systems Operation of parking assistance systems (if applicable) ALL drive pedals operate correctly
  10. Ensure no evidence of water ingress
  11. Operation and condition of seatbelts / Mountings
  12. Security of seat mountings, head rests and seat adjustment mechanism
  13. 301655 RAC Approved preparation standard insert 0513 v Operation of interior lights
  14. Operation of rear view mirror /sun visors
  15. Operation and condition of sunroof mechanism(if applicable)
  16. Ensure correct operation of parcel shelf
  17. Ensure interior trim / dashboard for tears, holes, burns or excessive soiling

5.ROAD WHEELS & TYRE CHECK

  1. Ensure vehicle jack, tool kit, locking wheel nut and safety equipment
  2. Ensure minimum tread depth of 3mm across all tyres including spare (if applicable)
  3. Ensure road wheels are free from distortion, gouges or visible cracking
  4. Ensure tyres are free from cuts, bulges and inappropriate repairs
  5. Ensure no evidence of uneven tyre wear or casing damage

6.ENGINE COMPARTMENT

  1. Check engine oil for correct level and dipstick oil sample is free from contamination
  2. Ensure coolant antifreeze content, and ensure system is free of visual contamination
  3. Check vehicles charging system for minimum output
  4. Ensure correct gearbox fluid levels, manual or automatic (where applicable)
  5. Check to ensure all fluid levels; e.g. brake, clutch, power steering, washer reservoir and battery (including security)
  6. Auxiliary drive belts, condition and tension
  7. Engine mountings for security and condition
  8. Wiring, pipes, hoses, oil and fuel feed lines for routing; are free from damage, chafing and leaks (where visible)
  9. Free from fluid leaks
  10. Condition of cooling system radiator and engine oil cooler /inter cooler are free from damage or excessive corrosion
  11. No evident undue engine noise
  12. For hybrid vehicles only
  13. Operation of Hybrid cooling system
  14. Switchable power-train mount
  15. Hybrid entertainment and information display

7.UNDERBODY

  1. Exhaust condition and mountings
  2. Clamps and security
  3. Ensure no evidence of fluid or exhaust leaks
  4. Catalytic Converter
  5. Operation and condition of steering for leaks and security
  6. Tie rod ends, CV boots and rack boots condition
  7. Front and rear suspension
  8. No visual evidence of faults to braking components
  9. Ensure brake pads have a minimum of 50% material remaining
  10. Check underbody for excess corrosion and ensure that the Chassis is free from extensive structural repairs
  11. Ensure transmission / driveshaft is secure and free from excessive free-play

8.CONVENIENCE

  1. Fully cleaned and valeted vehicles
  2. Owners Guide
  3. Keys and remote fobs
  4. Service history (if applicable)